Last modified by Nicolas Michon on 2019/07/05 18:08

From version 46.1
edited by Nicolas Michon
on 2019/05/17 14:17
To version 47.1
edited by Nicolas Michon
on 2019/06/24 10:29
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -68,7 +68,6 @@
68 68  There are a few optional additional steps described here:
69 69  
70 70  * Change the packaging options
71 -* Add liblinphone_tester
72 72  * Disable video support
73 73  * Select the number of CPU cores used for the build
74 74  * Add networking packages
... ... @@ -188,7 +188,6 @@
188 188  If you want to add liblinphone_tester and/or flexisip to the final image you can add the following line in **local.conf**:
189 189  
190 190  {{code}}
191 -IMAGE_INSTALL_append = " linphone-tester"
192 192  IMAGE_INSTALL_append = " flexisip"
193 193  {{/code}}
194 194  
... ... @@ -276,7 +276,7 @@
276 276  
277 277  By default the machine architecture for which Yocto builds the image is qemux86 but you can choose to build for any available emulated or hardware machine by specifying it in the local.conf file under the "Machine Selection" section.
278 278  
279 -The Linphone package detailed here allows you to use linphone-daemon and linphonec, as well as liblinphone_tester if you added it in the configuration files.
277 +The Linphone package detailed here allows you to use linphone-daemon and linphonec, as well as liblinphone_tester.
280 280  
281 281  == Build for Wandboard Solo Freescale i.MX6 Cortex-A9 ==
282 282  
... ... @@ -379,4 +379,6 @@
379 379  
380 380  === Start liblinphone_tester and linphone-daemon ===
381 381  
382 -Once the sd card is in the Wanboard you can boot with the default login "root". You can find liblinphone_tester, linphone-daemon and linphonec under /usr/bin/.
380 +Once the sd card is in the Wanboard you can boot with the default login "root". You can find liblinphone_tester, linphone-daemon and linphonec under /opt/belledonne-communications/bin/ (the installation prefix can be set in the recipe file by modifying the variable `INSTALL_PATH`).
381 +
382 +